Spot diatom mud mixer Dry powder mixing production line 1000 type mixing horizontal dry powder U-shaped barrel mixer
The horizontal mixer is a device that can be made according to the actual needs of customers. Conventional food materials are made of 304 stainless steel, chemical materials that are slightly corrosive can be made of 304 stainless steel, and corrosive materials that are highly corrosive can be made of 316L stainless steel. The horizontal mixer materials also include carbon steel, 201 stainless steel, etc. If necessary, please contact the sales personnel to provide you with a quotation.
The horizontal mixer is a device that can be customized according to the actual needs of customers. Generally, the materials used by customers are recommended based on the materials used by customers. There are also customers who specify the required materials: 304 stainless steel for conventional food materials, 304 stainless steel for chemical materials with slight corrosivity, and 316L stainless steel for corrosive materials. If these are not the cases, customers can choose the materials themselves: carbon steel, 201 stainless steel.
Mixing effect and mixing ratio of horizontal mixer: Horizontal mixer is suitable for mixing dry powder materials (the specific gravity should not be particularly large by about 2 times), and it can meet the mixing requirements in about 5-15 minutes (excluding the feeding time and discharging time). The specific ratio can be as high as 96.5% for A material and 3.5% for B material (if the dry powder proportion is larger, it is recommended to choose a conical mixer. If there is caking and the mixing amount is not large, it is recommended to choose a high-speed flour mixer).
There are several types of discharge ports for horizontal mixers: wall mounted (square) type, generally 100-1000KG, can be selected. Advantages: stirring without dead ends.
This type of discharge port can be selected for knife type (circular) and small models. Specification and diameter 133-159-219-273. Disadvantages: There is a small section of material that cannot be stirred.
Butterfly valve type (circular) is suitable for fine powder or some liquid materials to prevent leakage
Butterfly valves can be divided into three switching modes: manual, pneumatic, and electric (the latter two can be automatically controlled)
The gate valve (square) uses a motor to drive the lifting reducer to push and pull laterally to play a switching role (suitable for automatic control)
Audited Supplier 
){kind=link}