Silica powder drying mixer, Shenyang manufacturer, powder mixer, food dry powder granule, stainless steel horizontal mixer
The horizontal mixer is the equipment that can be made according to the actual needs of customers. Conventional food materials are made of 304 stainless steel, chemical materials with slight corrosivity can be made of 304 stainless steel, corrosive materials can be made of 316L stainless steel, and the horizontal mixer materials are also made of carbon steel, 201 stainless steel, etc. If necessary, please contact the salesperson to give you a quotation.
Mixing principle and advantages of the horizontal mixer: the horizontal mixer adopts a double spiral belt design. The outer layer is pushed and stirred by two 360 ° circular spiral belts from both sides to the center (outlet position), and the inner layer is pushed and stirred by two 360 ° circular spiral belts from the center (outlet position) to both sides. Abbreviation: the two sections of the large spiral belt are concentrated in the middle, and the small spiral belt is dispersed in the middle to both ends. The advantage is that one revolution of the main shaft is equivalent to four different forces acting on the material in different directions. The mixing time is short and the effect is good.
If the customer wants to change the outlet position of the horizontal mixer, is it the same? It is not recommended to change the screw belt direction and mixing effect of the whole machine due to different outlet positions.
Heating principle of heating type horizontal mixer: oil temperature heating is adopted, and an interlayer is set on the outer layer of the original mixer. There is a heating rod inside (the heating power and quantity are determined according to the customer's heating time requirements.) The heating rod heats the internal heat transfer oil (the customer requires that heat transfer oil be used when the material temperature is above 40 °; water can also be used as the heating conductor when the material temperature is below 40 °). The exhaust port must be kept smooth during use. External insulation layer can also be added to reduce heat loss.
){kind=link}