| Customization: | Available |
|---|---|
| Additional Capabilities: | Drying |
| After-sales Service: | Online Support |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product name | horizontal mixer |
| Model | 500kg(customized) |
Materials |
customized |
Washing Powder 304 Mixer Horizontal Plastic PP/PE Heating Drying Mixer Pesticide Drying Horizontal Mixer
A horizontal mixer is a device that can be made according to the actual needs of customers. Conventional food materials are made of 304 stainless steel, while chemical materials with slight corrosion can be made of 304 stainless steel, while those with high corrosion can be made of 316L stainless steel. Horizontal mixers are also made of carbon steel, 201 stainless steel, etc. If necessary, please contact sales personnel to provide you with a quotation.
A horizontal heating mixer is a type of mixer that adds a interlayer on the outer wall of the original horizontal mixer. The interlayer is filled with thermal oil, and is electrically heated with a heating rod. The temperature is controllable, and the oil temperature is pre-set. If the oil temperature is set to 150 ° C, the heating system will work and stop heating. If the oil temperature is below 150 ° C, the heating system will start, ensuring that the temperature of the heating system is constant and stable, the material drying and heating effect is good, and the output is high.
Mixing time of the horizontal mixer: Approximately 5 to 15 minutes to meet the mixing requirements (excluding the feeding and discharging time). The specific proportion can reach 96.5% for A material and 3.5% for B material (if the dry powder proportion is larger, it is recommended to purchase a conical mixer)
The horizontal mixer adopts a double screw belt design, with the outer layer being pushed and stirred by the left and right 360 ° circular screw belts from both sides to the center (discharge port position), and the inner layer being pushed and stirred by the left and right 360 ° circular screw belts from the center (discharge port position) to both sides.
){kind=link}