The price is for reference only. The actual price is subject to the communication between the two parties!!!
| Product name |
centrifuge |
| Model |
800MM(customized) |
Materials |
stainless steel |
Custom model Vegetable onion beef centrifugal dehydrator
Operating Instructions for Dehydrator
1. Put the washing material to be dehydrated evenly and smoothly into the rotating hub, paying attention to balance and not overloading.
2. After about 90 seconds of starting the motor, the machine reaches its normal operating speed, and a large amount of washing liquid begins to flow out of the outlet pipe.
3. The machine runs for about 8-10 minutes, and there is basically no washing liquid flowing out of the outlet pipe. You can cut off the power supply. After 1-2 minutes, slowly brake the opening and closing arm brakes several times, and the machine stops running.
Centrifugal dryer/ fruit and vegetable drying machine/ Vegetable centrifugal
Structural characteristics of the dehydrator
1. The dehydrators are all of a three-legged suspension type structure, which can effectively reduce the foot vibration generated during operation due to uneven load in the rotor hub.
2. The housing is made of stainless steel or steel material, the rotating hub is made of stainless steel plate, the cage base and chassis are made of cast iron material, and the water outlet pipe is under the chassis.
3. The main shaft is made of steel through heat treatment and finishing.
4. The transmission part adopts triangular tape transmission, and the centrifugal starting wheel is directly driven by the motor, which can slowly start the machine and gradually reach the design speed to ensure stable operation of the machine.
5. The machine has a brake opening and closing arm, which has good braking performance and can quickly stop the machine.
Stainless steel industrial bath towel centrifugal dehydrator
Structural features of dehydrator
1. The dehydrators are all tripod pendulum-type structures, which can effectively reduce the foot vibration generated during operation due to the unbalanced load in the hub.
2. The shell is made of stainless steel or steel, the hub is made of stainless steel plate, the cage base and the chassis are made of cast iron, and the outlet pipe is under the chassis.
3. The main shaft is made of steel after heat treatment and finishing.
4. The transmission part is driven by triangular belt, and the centrifugal starting wheel is directly driven by the motor, which can make the machine start slowly and gradually reach the design speed to ensure the smooth operation of the machine.
5. There is a brake opening and closing arm in the machine, which has good braking performance and can stop the machine quickly.
The main component of the dehydrator is a stainless steel liner, with holes around the liner. The clothes to be dehydrated are placed in the stainless steel liner. The motor drives the stainless steel liner to rotate at high speed through the belt. Therefore, a great centrifugal force is generated, and the water is thrown out through the small hole on the inner liner, and is collected and discharged uniformly. Generally speaking, for wet clothes, the drying effect achieved by the dehydrator working for two minutes is almost the same as that achieved by the dryer working for 20 minutes, but the dehydrator cannot dry the clothes. Therefore, one way to save time and energy is to dehydrate wet clothes and dry them after dehydration.
FAQ
Q. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.Other payment terms can also be negotiated.
Q. How about your delivery time?
A: Generally, it will take 10 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q. Can you produce according to the samples?
A: Yes, we can produce molde by your samples or technical
drawings.
Q. Do you test all your machines before delivery?
A: Yes, we have 100% tested before delivery.
){kind=link}