Plastic particle mixer dryer crusher drying mixer plastic particle mixer vertical mixer
The vertical mixer is a device that can be made according to the actual needs of customers. The conventional plastic particle mixer is made of 201 stainless steel. 304 stainless steel can be used if the chemical industry is slightly corrosive, and 316L stainless steel can be used if the chemical industry is highly corrosive. If necessary, please contact the sales personnel to give you a quotation.
How the vertical drying mixer works to dry materials: there is an umbrella-shaped funnel-shaped air discharge hood inside the mixer, and a 159 diameter stainless steel pipe on the external side is seamlessly connected with it. There is a 380V 18KW -- 24KW dry-fired heating rod inside the pipe, and the top of the heating rod is equipped with a medium-pressure fan. When the heating is started, the fan will transfer the heat generated by the heating rod to the umbrella-shaped air discharge hood, The hot air will evenly distribute the heat to the material surface in a 360 ° cyclone through the air discharge hood to make it dry quickly.
How to control the temperature of the heating equipment: the heating equipment is equipped with an electric control cabinet (excluding the hot-air centrifugal dehydrator), and is equipped with a temperature control instrument, which can set the required temperature according to the actual requirements of the customer. When the temperature reaches the set value, the heating equipment stops working and starts automatically when it is lower than the set value, Circulation (generally, the oil temperature is heated here. The temperature detection point is in the oil of the heating layer, and the temperature of the oil is measured. The temperature detection point of the hot air heating is at the bottom of the heating rod, and the temperature of the tuyere is measured).
The working principle of the vertical mixer is to use the rapid rotation of the screw to lift the raw materials from the bottom of the barrel to the top, and then drop them in an umbrella-like manner to the bottom, so that the raw materials can be stirred up and down in the barrel, and a large amount of raw materials can be evenly mixed in a short time.
If a heating device is installed, there will be high temperature air flow in the whole barrel, and the material can be dried in a short time due to the material turning up and down.
Vertical design: easy to operate, easy to maintain, and has the characteristics of small floor space, large capacity, low power consumption, labor saving, fast and uniform mixing.
It is mainly applicable to various plastic raw materials, granular materials, recycled materials, crushed materials, sheet materials, film, nozzle materials and some dry powder mixing equipment.
FAQ
Q. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.Other payment terms can also be negotiated.
Q. How about your delivery time?
A: Generally, it will take 10 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q. Can you produce according to the samples?
A: Yes, we can produce molde by your samples or technical
drawings.
Q. Do you test all your machines before delivery?
A: Yes, we have 100% tested before delivery.
Audited Supplier 
){kind=link}
){kind=link}